Use and Maintenance of Copper Flotation Machine

Update:16-08-2018
Summary:

The raw ore is crushed by a jaw crusher, and the crushe […]

The raw ore is crushed by a jaw crusher, and the crushed product is sent to the ball mill through a belt conveyor. The mill product is sieved through a linear vibrating screen. The product on the sieve is conveyed to the ball mill through a belt conveyor for regrind, and the product is returned to the straight line. The vibrating screen and the vibrating screen are conveyed to the cyclone by a rubber pump. The underflow of the cyclone is returned to the ball mill for re-grinding, and the overflow is transported by the rubber pump to the high-efficiency stirring tank. The stirred slurry is subjected to rough selection and selection to obtain Cu, Cu and concentrate slurry transferred from the rubber pump to the high-efficiency stirring tank. The stirred slurry is subjected to rough selection and selection to obtain a copper concentrate. The copper concentrate is concentrated and filtered by a high efficiency reforming thickener and filter press to form a copper concentrate.

Use and maintenance of copper Flotation Machine:

1. The working ability and working period are the same as other machines. It is decided to maintain and maintain the normal work of all major parts. All working parts should be carefully checked in 3-4 months, and the new flotation machine should be used initially. Check frequently for several months;

2. Only qualified personnel can carry out inspections.

3. In order to replace the vulnerable parts in time to reduce the downtime, a full set of wearing parts must be kept in the warehouse. The date of use and the amount of reserves of consumables are determined on a case-by-case basis.

4. It is necessary to ensure that the operator of the flotation machine has certain technical guidance or training, and strives to be fully familiar with the machine.

5. In order to prevent dirt and useless substances from being mixed into the oil, there should be a filter when filling the oil. When the flotation machine is working, the oil cover should be sealed.

6, after driving to check, and contact with the upper and lower process can be started.

7. The order of driving is: press the upper switch and press the start button.

8. After starting the machine, it is strictly forbidden to touch the rotating part by hand.